Saturday, July 21, 2018
Sample IPSLA VO Configuration
Sample IPSLA VO Configuration
My environment: 15.0(1)SE3, 3560 8-port switch
IP SLA VO is a tools to simulate video traffic in a network, especially you want to test the network readiness before the video endpoints are in place.
To enable IP SLA VO:
ip sla 1
video 10.1.91.2 27010 source-ip 10.1.93.2 source-port 20010 profile TELEPRESENCE
duration 60
frequency 75
ip sla schedule 1 life forever start-time now
ip sla enable reaction-alerts
ip sla responder
To make sure it is running:
Harbour-UC-SW02#sh ip sla stat 1
IPSLAs Latest Operation Statistics
IPSLA operation id: 1
Type of operation: video
Latest operation start time: 00:07:16 HKT Wed Aug 8 2012
Latest operation return code: OK
Packets:
Sender Transmitted: 57487
Responder Received: 57487
Latency one-way time:
Number of Latency one-way Samples: 37020
Source to Destination Latency one way Min/Avg/Max: 0/5/11 milliseconds
NTP sync state: SYNC
Inter Packet Delay Variation, RFC 5481 (IPDV):
Number of SD IPDV Samples: 37019
Source to Destination IPDV Min/Avg/Max: 0/500/1008 milliseconds
Packet Loss Values:
Loss Source to Destination: 0
Out Of Sequence: 0
Number of successes: 4
Number of failures: 0
Operation time to live: Forever
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.